Dunlop Trade logo

GX-500 FLEXIBLE GROUT

DUNLOP GX-500 FLEXIBLE GROUT is a water and frost-resistant powder-based grout suitable for use with both wall and floor tiles.  Ideal for grouting ceramic, porcelain, and mosaic tiles in interior and exterior locations including power showers (without body jets) and swimming pools.  The flexible nature of the product reduces the risk of cracking, leaving a super smooth but hard wearing finish without patchiness or surface discolouration.  Also suitable for use with brick slips, refer to Technical Department for advice.

For the perfect finish use with DUNLOP FX-90 SILICONE SEALANT, available in matching colours.

FLEXIBLE SLOWSET FLOOR & WALL TILE ADHESIVE

DUNLOP FLEXIBLE SLOWSET FLOOR & WALL TILE ADHESIVE is a water-resistant powder-based tile adhesive for use in internal and external areas. Mixed with water, it is suitable for fixing floor and wall tiles including porcelain, mosaics, quarry and brick slips. Tiles can be adjusted for up to 20 minutes after positioning making this perfect for fixing large format or tiles which are difficult to set out. The adhesive is fully set and tiles are ready for grouting after 24 hours.  The set adhesive is frost and water-resistant and can be used in showers, or under continuous immersion such as swimming pools.

 

Exceeds the requirements of BS EN12004 for a C2TE adhesive.

Flexible Floor & Wall Grout

DUNLOP FLEXIBLE FLOOR & WALL GROUT is a water and frost-resistant powder based grout. Flexible and highly durable, it can be used for grouting natural stone, mosaics, glazed and porcelain tiles, in joints up to 20mm. Suitable for interior and exterior use, it is ideal for grouting tiles fixed to overlaid timber floors, heated screeds and swimming pools. Sets in 24 hours.

Floor & Wall Grout

DUNLOP FLOOR & WALL GROUT is a mix-with-water powder grout suitable for both interior and exterior use. When used with DUNLOP FLEXIBLE ADDITIVE it can be used with porcelain tiles and used for power showers, swimming pools, heavily trafficked floors and areas with limited movement/deflection e.g. heated screeds and suitably constructed timber floors. Available in three shades, it can be used in ceramic and natural stone wall and floor tile joints between 2-12mm wide.

Wall Grout

DUNLOP WALL GROUT is a mix-with-water powder grout suitable for use in both interior and exterior areas including showers. The wall grout is also suitable for use in swimming pools, when mixed with DUNLOP FLEXIBLE ADDITIVE. Available in white and ivory, it can be used in ceramic wall tile and mosaic joints up to 3mm wide.

Tile Adhesive For Green Screed

DUNLOP TILE ADHESIVE FOR GREEN SCREED is a highly polymer modified powder adhesive which allows for the fast track application of tiles to newly laid concrete or screed. The floor tile adhesive has enhanced adhesion on low porosity backgrounds with increased flexibility to allow for movement and shrinkage when the background continues to dry. Suitable for use with porcelain tiles. Floor tiles can be applied to new screed after 24 hours and new concrete after just 7 days.

Floor & Wall Plus Tile Adhesive

DUNLOP FLOOR AND WALL PLUS TILE ADHESIVE is a water-resistant powder-based tile adhesive suitable for fixing floor and wall tiles including porcelain, fully vitrified, mosaics, quarry, brick slips and stone claddings. Suitable for interior and exterior areas including patios, tiles can be grouted 24 hours after fixing. DUNLOP FLOOR AND WALL PLUS TILE ADHESIVE is frost and water-resistant and can be used in showers, or under continuous immersion such as swimming pools.

Floor & Wall Tile Adhesive

DUNLOP FLOOR AND WALL TILE ADHESIVE is a water-resistant floor & wall tile adhesive, suitable for fixing ceramic floor and wall tiles, vitrified tiles and mosaics, quarry tiles, brick slips and stone claddings in interiors and exteriors. This product is not suitable for porcelain tiles unless a flexible additive is used i.e. DUNLOP FLEXIBLE ADDITIVE. DUNLOP FLOOR AND WALL ADHESIVE is frost and water-resistant and can be used in showers, swimming pools or under continuous immersion.

Tile-On-Wood

DUNLOP TILE-ON-WOOD is a high strength, water resistant, ready mixed floor tile adhesive and grout. It is suitable for use on moisture stable timber based boards such as moisture resistant plywood and tongue and grooved timber. Not suitable for fully vitrified or porcelain tiles.

Multi-Purpose Fix ‘n’ Grout

DUNLOP MULTI-PURPOSE FIX ‘N’ GROUT is a ready-mixed tile adhesive and grout specially formulated for fixing ceramic or mosaic wall tiles in showers, bathrooms, toilet areas and kitchens. It may also be used just as an adhesive in power showers if a suitable grout is used.