DUNLOP LX-360 FIBRE LEVELLER is a single-part floor leveller with added fibres for increased strength and flexibility. Suitable for preparing interior floors in dry areas prior to laying sheet and tile soft floor coverings, carpet, natural stone and ceramic tiles. Can be used on both absorbent and non-absorbent interior floor surfaces including timber, concrete, cement:sand screeds, terrazzo, asphalt, quarry tiles and old but sound adhesive residues. It can be laid at depths from 3mm up to 60mm in one application. Ideal for use with underfloor and undertile floor heating systems.
DUNLOP LX-200 FLEX LEVELLER is a single-part floor leveller with built-in polymer for increased flexibility. Suitable for preparing interior floors prior to laying sheet and tile soft floor coverings, natural stone, porcelain and ceramic tiles. It can be used on a wide range of absorbent and non-absorbent floor surfaces including concrete, cement:sand screeds, terrazzo, asphalt, quarry tiles and old but sound adhesive residues. It can be laid at depths from a feather edge up to 5mm and from 5mm-20mm with the addition of 3mm granite chippings.
DUNLOP 2-PART RAPIDSET FLEX is a 2-part highly flexible, water resistant, rapid-setting floor tile adhesive suitable for most backgrounds, particularly moisture stable timber based boards, tongue and grooved floorboards and also concrete and screeds. Suitable for fixing ceramic tiles, non-translucent natural stone, fully vitrified and porcelain tiles. Sets in 3 hours.
DUNLOP LARGE FORMAT & NATURAL STONE ADHESIVE is a rapid-setting, semi-pourable, thick-bed floor tile adhesive suitable for fixing large format floor tiles, fully vitrified including porcelain, natural stone and terrazzo. It can also be used to level uneven floors – before fixing tiles a layer of adhesive can be applied up to 25mm thick. Suitable at 3-25mm thickness it is ideal for tiles/slabs of uneven thickness and uneven surfaces. The adhesive is water-resistant and can be used in interior & exterior areas including showers and swimming pools. Tiles can be grouted after 3 hours.
DUNLOP RAPIDSET FLOOR & WALL TILE ADHESIVE is a water-resistant, fast-setting floor & wall tile adhesive, suitable for thin and thick-bed fixing in interiors and exteriors. Suitable for fixing ceramic floor and wall tiles, vitrified tiles and mosaics, quarry tiles, brick slips and stone claddings, tiles can be grouted in only 3 hours. Frost and water-resistant, it can be used for showers or swimming pools. This product is not suitable for fully vitrified and porcelain tiles unless a flexible additive is used such as DUNLOP FLEXIBLE ADDITIVE.
DUNLOP SET FAST PLUS FLEXIBLE TILE ADHESIVE is a rapid-setting powder-based tile adhesive suitable for fixing floor and wall tiles including porcelain, fully vitrified, mosaics, quarry, brick slips and stone claddings. Suitable for interior and exterior areas including patios, the set adhesive is frost and water resistant and tiles can be grouted 3 hours after fixing. Suitable for use in showers, or under continuous immersion such as swimming pools. Our Set Fast Plus Flexible Tiling Adhesive will get the job done in no time!
DUNLOP FLEXIBLE RAPIDSET ADHESIVE is a white rapid-setting, powder-based tile adhesive, suitable for fixing floor and wall tiles, fully vitrified including porcelain, mosaics, quarry, brick slips and stone cladding. It offers many benefits to users including rapid-setting properties meaning tiles can be grouted 3 hours after fixing. The set adhesive is frost and water-resistant and can be used in showers, or under continuous immersion such as swimming pools. Longer working time and increased open time allows for larger mixes and gives additional time to apply the adhesive and fix the tiles.