DUNLOP GX-500 FLEXIBLE GROUT is a water and frost-resistant powder-based grout suitable for use with both wall and floor tiles. Ideal for grouting ceramic, porcelain, and mosaic tiles in interior and exterior locations including power showers (without body jets) and swimming pools. The flexible nature of the product reduces the risk of cracking, leaving a super smooth but hard wearing finish without patchiness or surface discolouration. Also suitable for use with brick slips, refer to Technical Department for advice.
For the perfect finish use with DUNLOP FX-90 SILICONE SEALANT, available in matching colours.
DUNLOP FLEXIBLE SLOWSET FLOOR & WALL TILE ADHESIVE is a water-resistant powder-based tile adhesive for use in internal and external areas. Mixed with water, it is suitable for fixing floor and wall tiles including porcelain, mosaics, quarry and brick slips. Tiles can be adjusted for up to 20 minutes after positioning making this perfect for fixing large format or tiles which are difficult to set out. The adhesive is fully set and tiles are ready for grouting after 24 hours. The set adhesive is frost and water-resistant and can be used in showers, or under continuous immersion such as swimming pools.
Exceeds the requirements of BS EN12004 for a C2TE adhesive.
DUNLOP LARGE FORMAT & NATURAL STONE ADHESIVE is a rapid-setting, semi-pourable, thick-bed floor tile adhesive suitable for fixing large format floor tiles, fully vitrified including porcelain, natural stone and terrazzo. It can also be used to level uneven floors – before fixing tiles a layer of adhesive can be applied up to 25mm thick. Suitable at 3-25mm thickness it is ideal for tiles/slabs of uneven thickness and uneven surfaces. The adhesive is water-resistant and can be used in interior & exterior areas including showers and swimming pools. Tiles can be grouted after 3 hours.
DUNLOP FLEXIBLE FLOOR & WALL GROUT is a water and frost-resistant powder based grout. Flexible and highly durable, it can be used for grouting natural stone, mosaics, glazed and porcelain tiles, in joints up to 20mm. Suitable for interior and exterior use, it is ideal for grouting tiles fixed to overlaid timber floors, heated screeds and swimming pools. Sets in 24 hours.
DUNLOP FLOOR & WALL GROUT is a mix-with-water powder grout suitable for both interior and exterior use. When used with DUNLOP FLEXIBLE ADDITIVE it can be used with porcelain tiles and used for power showers, swimming pools, heavily trafficked floors and areas with limited movement/deflection e.g. heated screeds and suitably constructed timber floors. Available in three shades, it can be used in ceramic and natural stone wall and floor tile joints between 2-12mm wide.
DUNLOP WALL GROUT is a mix-with-water powder grout suitable for use in both interior and exterior areas including showers. The wall grout is also suitable for use in swimming pools, when mixed with DUNLOP FLEXIBLE ADDITIVE. Available in white and ivory, it can be used in ceramic wall tile and mosaic joints up to 3mm wide.
DUNLOP TILE ADHESIVE FOR GREEN SCREED is a highly polymer modified powder adhesive which allows for the fast track application of tiles to newly laid concrete or screed. The floor tile adhesive has enhanced adhesion on low porosity backgrounds with increased flexibility to allow for movement and shrinkage when the background continues to dry. Suitable for use with porcelain tiles. Floor tiles can be applied to new screed after 24 hours and new concrete after just 7 days.
DUNLOP 2-PART RAPIDSET FLEX is a 2-part highly flexible, water resistant, rapid-setting floor tile adhesive suitable for most backgrounds particularly moisture stable timber based boards, tongue and grooved floorboards and also concrete and screeds. Suitable for fixing ceramic tiles, non-translucent natural stone, fully vitrified and porcelain tiles. Sets in 3 hours.
DUNLOP RAPIDSET FLOOR & WALL TILE ADHESIVE is a water-resistant, fast-setting floor & wall tile adhesive, suitable for thin and thick-bed fixing in interiors and exteriors. Suitable for fixing ceramic floor and wall tiles, vitrified tiles and mosaics, quarry tiles, brick slips and stone claddings, tiles can be grouted in only 3 hours. Frost and water-resistant, it can be used for showers or swimming pools. This product is not suitable for fully vitrified and porcelain tiles unless a flexible additive is used such as DUNLOP FLEXIBLE ADDITIVE.
DUNLOP SET FAST PLUS FLEXIBLE TILE ADHESIVE is a rapid-setting powder-based tile adhesive suitable for fixing floor and wall tiles including porcelain, fully vitrified, mosaics, quarry, brick slips and stone claddings. Suitable for interior and exterior areas including patios, the set adhesive is frost and water resistant and tiles can be grouted 3 hours after fixing. Suitable for use in showers, or under continuous immersion such as swimming pools. Our Set Fast Plus Flexible Tiling Adhesive will get the job done in no time!