Dunlop Trade logo

LX-360 Fibre Leveller

DUNLOP LX-360 FIBRE LEVELLER is a single-part floor leveller with added fibres for increased strength and flexibility. Suitable for preparing interior floors in dry areas prior to laying sheet and tile soft floor coverings, carpet, natural stone and ceramic tiles. Can be used on both absorbent and non-absorbent interior floor surfaces including timber, concrete, cement:sand screeds, terrazzo, asphalt, quarry tiles and old but sound adhesive residues. It can be laid at depths from 3mm up to 60mm in one application. Ideal for use with underfloor and undertile floor heating systems.

LX-200 Flex Leveller

DUNLOP LX-200 FLEX LEVELLER is a single-part floor leveller with built-in polymer for increased flexibility. Suitable for preparing interior floors prior to laying sheet and tile soft floor coverings, natural stone, porcelain and ceramic tiles. It can be used on a wide range of absorbent and non-absorbent floor surfaces including concrete, cement:sand screeds, terrazzo, asphalt, quarry tiles and old but sound adhesive residues. It can be laid at depths from a feather edge up to 5mm and from 5mm-20mm with the addition of 3mm granite chippings.

LX-40 Floor Leveller

DUNLOP LX-40 FLOOR LEVELLER is a single-part floor leveller with built-in polymer for smoothing concrete floors. This product is suitable for preparing interior floors in dry areas prior to laying decorative floor coverings. It can be used on a wide range of common building surfaces including concrete, cement:sand screeds, terrazzo, quarry tiles and old but sound adhesive residues. It can be laid at depths from 2mm up to 12mm.

Large Format & Natural Stone Adhesive

DUNLOP LARGE FORMAT & NATURAL STONE ADHESIVE is a rapid-setting, semi-pourable, thick-bed floor tile adhesive suitable for fixing large format floor tiles, fully vitrified including porcelain, natural stone and terrazzo. It can also be used to level uneven floors – before fixing tiles a layer of adhesive can be applied up to 25mm thick. Suitable at 3-25mm thickness it is ideal for tiles/slabs of uneven thickness and uneven surfaces. The adhesive is water-resistant and can be used in interior & exterior areas including showers and swimming pools. Tiles can be grouted after 3 hours.