DUNLOP GX-500 FLEXIBLE GROUT is a water and frost-resistant powder-based grout suitable for use with both wall and floor tiles. Ideal for grouting ceramic, porcelain, and mosaic tiles in interior and exterior locations including power showers (without body jets) and swimming pools. The flexible nature of the product reduces the risk of cracking, leaving a super smooth but hard wearing finish without patchiness or surface discolouration. Also suitable for use with brick slips, refer to Technical Department for advice.
For the perfect finish use with DUNLOP FX-90 SILICONE SEALANT, available in matching colours.
DUNLOP FLEXIBLE SLOWSET FLOOR & WALL TILE ADHESIVE is a water-resistant powder-based tile adhesive for use in internal and external areas. Mixed with water, it is suitable for fixing floor and wall tiles including porcelain, mosaics, quarry and brick slips. Tiles can be adjusted for up to 20 minutes after positioning making this perfect for fixing large format or tiles which are difficult to set out. The adhesive is fully set and tiles are ready for grouting after 24 hours. The set adhesive is frost and water-resistant and can be used in showers, or under continuous immersion such as swimming pools.
Exceeds the requirements of BS EN12004 for a C2TE adhesive.
DUNLOP LX-360 FIBRE LEVELLER is a single-part floor leveller with added fibres for increased strength and flexibility. Suitable for preparing interior floors in dry areas prior to laying sheet and tile soft floor coverings, carpet, natural stone and ceramic tiles. Can be used on both absorbent and non-absorbent interior floor surfaces including timber, concrete, cement:sand screeds, terrazzo, asphalt, quarry tiles and old but sound adhesive residues. It can be laid at depths from 3mm up to 60mm in one application. Ideal for use with underfloor and undertile floor heating systems.
DUNLOP LX-200 FLEX LEVELLER is a single-part floor leveller with built-in polymer for increased flexibility. Suitable for preparing interior floors prior to laying sheet and tile soft floor coverings, natural stone, porcelain and ceramic tiles. It can be used on a wide range of absorbent and non-absorbent floor surfaces including concrete, cement:sand screeds, terrazzo, asphalt, quarry tiles and old but sound adhesive residues. It can be laid at depths from a feather edge up to 5mm and from 5mm-20mm with the addition of 3mm granite chippings.
DUNLOP LARGE FORMAT & NATURAL STONE ADHESIVE is a rapid-setting, semi-pourable, thick-bed floor tile adhesive suitable for fixing large format floor tiles, fully vitrified including porcelain, natural stone and terrazzo. It can also be used to level uneven floors – before fixing tiles a layer of adhesive can be applied up to 25mm thick. Suitable at 3-25mm thickness it is ideal for tiles/slabs of uneven thickness and uneven surfaces. The adhesive is water-resistant and can be used in interior & exterior areas including showers and swimming pools. Tiles can be grouted after 3 hours.
DUNLOP SET FAST PLUS FLEXIBLE TILE ADHESIVE is a rapid-setting powder-based tile adhesive suitable for fixing floor and wall tiles including porcelain, fully vitrified, mosaics, quarry, brick slips and stone claddings. Suitable for interior and exterior areas including patios, the set adhesive is frost and water resistant and tiles can be grouted 3 hours after fixing. Suitable for use in showers, or under continuous immersion such as swimming pools. Our Set Fast Plus Flexible Tiling Adhesive will get the job done in no time!
DUNLOP FLEXIBLE RAPIDSET ADHESIVE is a white rapid-setting, powder-based tile adhesive, suitable for fixing floor and wall tiles, fully vitrified including porcelain, mosaics, quarry, brick slips and stone cladding. It offers many benefits to users including rapid-setting properties meaning tiles can be grouted 3 hours after fixing. The set adhesive is frost and water-resistant and can be used in showers, or under continuous immersion such as swimming pools. Longer working time and increased open time allows for larger mixes and gives additional time to apply the adhesive and fix the tiles.
DUNLOP PROCOVER UNCOUPLING MAT gives you the confidence to tile onto difficult floors which are at risk from stresses and accommodate lateral movement for the tile installation when used as a system with a recommended DUNLOP flexible cement based adhesive. Ideal for tiling internal floors such as timber and new sand and cement screeds, it is suitable for bathrooms and kitchens with most types of ceramics, natural stone and mosaics.